Blue Spot Water

Features :

• Optimal Flow Rate: Consistent 250 LPH ($\approx 2,000\text{ GPD}$) output for commercial needs.

• Integrated Booster Pump: High-efficiency pump ensures optimal operating pressure for maximum TDS rejection.

• Compact Skid Design: Space-saving and pre-assembled on a corrosion-resistant frame (often SS304).

• Pressure & Flow Monitoring: Includes pressure gauges and flow meters for easy performance tracking.

• Safety & Control: Features automatic controls such as a low-pressure switch to protect the pump and membranes.

What does it do:

Reverse osmosis operates by utilising a high-pressure pump to raise the pressure on the raw water side, compelling water to pass through a semi-permeable RO membrane of 0.001 microns. This process effectively retains approximately 95% to 99% of dissolved minerals in the reject stream, producing clean permeate water.

Good to know:

• Required Pre-treatment: To protect the RO membrane and achieve the expected lifespan, proper pre-filtration (sediment and carbon) is non-negotiable. If the feed water is hard or has iron, a water softener or iron removal filter must be installed upstream.

• Waste Water: RO is a separation process; a portion of the feed water (concentrate) is rejected to the drain, typically at a ratio of $1:1$ to $1:2$ (product to waste).

• $\text{TDS}$ Limits: Best performance is achieved when feed water TDS is below 2,000 ppm.

• Pre-Filtration is Critical: The lifespan and efficiency of the RO membrane are heavily dependent on the quality of the sediment and carbon filters.

• please note that TDS rejection rate and pure water production rate can differer from raw water supply

Specifications:

Brand Blue Spot Water

Model  PRO2000

Warranty Limited (6 Months) - On manufacturing defects

Colour Frame: Silver (Stainless Steel) or Coated Steel

Inlet Connection 21 inch or 43 inch

Flow Rate2000 GPD ($250\text{ LPH}$)

Working Pressure 10 - 14 bar ($150\text{ - }200\text{ psi}$)

UV Resistant No (Indoor Use Recommended)

Electricity needed Yes (220V Single Phase, 50Hz)

Maintenance:

Component Replace these filters every 6−12 Months:

Filter 1 Carbon Block Filter 

Filter 2 RO Membrane Reverse Osmosis (RO) Membrane (Typically 1 - 1 1/2 years)depending on water quality

What is in the box:

• $2000\text{ GPD}$ RO System Skid Assembly

• High-Pressure Pump and Motor

• RO Membrane(s) in Housing(s) (Typically $1\times 4040$ Commercial Grade)

• Pre-Filter Housings and Filter Cartridges

• Control Panel and Electrical Components

• All necessary interconnecting Pipework and Valves

Dimensions : 

Size : Purifier alone