Blue Spot Water

Features :

• Increased Capacity ($\text{T2}$): Utilises the larger {10'' x 54'' FRP Vessel and two bags of Calcite media for enhanced treatment volume and longer media life.

• Superior Acid Neutralisation: Effectively raises low pH water to a balanced, non-corrosive level (pH 7.0–7.5) using natural Calcite media.

• Whole-House Protection: Provides a high-flow solution, safeguarding all pipes, fittings, geysers, and sanitary ware from acid-related corrosion and staining (copper and lead).

• Durable & Corrosion-Proof: The $\text{FRP}$ (Fibre-Reinforced Plastic) vessel is rust-proof and designed for outstanding performance in harsh chemical environments.

• Manual Control Head: Simple and reliable operation allows the user to easily initiate backwash cycles to clean and reclassify the media bed for maximum efficiency.

What does it do:

This system is your dedicated acidic water treatment solution. As water passes up through the deep bed of Calcite media, a natural chemical reaction occurs: the acidic water slowly dissolves the calcium carbonate, releasing beneficial calcium ions and neutralising the acid.

1. Stops Pipe Corrosion: Neutralising the water's corrosive properties significantly slows down the likelihood of pinhole leaks and dramatically extends the life of your plumbing system.

2. Eliminates Staining: Removes the metallic taste and prevents the tell-tale blue-green stains on sinks, tubs, and showers caused by copper leaching from your pipes.

3. High-Flow Performance: The 1054 vessel size is engineered to handle a service flow rate suitable for busy households or small business operations without a significant pressure drop.

Good to know:

• Capacity & Flow Rate: The 1054 size is typically suitable for flow rates up to 1.5m3/hr (approximately 25LPM) of water, making it a powerful commercial calcite filter.

• Hardness Consideration: The process of pH correction adds calcium, which will increase the water's hardness. In cases where the initial water is already hard, a water softener (installed after the pH filter) may be necessary to prevent scale build-up.

• Optimal $\text{pH}$ Use: Best performance is achieved when treating water with a raw pH between $\text{pH 6.0}$ and $\text{pH 6.9}$. For lower pH water, blending the Calcite with a faster-reacting media may be required.

• Media Life: The two bags of media provide a large bed, offering a longer time between media top-ups compared to smaller vessels.

Specifications:

Vessel Size 10” x 54” FRP (Fibre-Reinforced Plastic)

Media Type Calcite pH Fix Media (Calcium Carbonate, CaCO3?)

Media Weight 50kgs (2 x 25kgs Bags)

Vessel Volume $\text{Approx. }60-62\text{ Litres}$

Filter Head Manual Controller Head (T2)

Max Flow Rate Up to 1500 LPH (Dependent on water quality)

Max Operating Pressure 10 bar/150 psi

Application Medium Residential / Light Commercial

Maintenance:

As a manual backwashing filter, simple, routine maintenance ensures peak performance.

1. Backwash Frequency: The Manual Filter Head must be used to backwash the media bed periodically (typically once a week). This process lifts the media to remove accumulated fines and prevent compaction or 'channelling.'

2. Media Replenishment: As the Calcite dissolves, the bed level drops. The media will require replenishment (topping up) approximately every 6-18 months via the top port, depending on the incoming water pH and water usage.

3. No Chemicals: The Calcite system is a natural process and requires no caustic chemical mixing or dosing.

What is in the box:

This package is a complete, ready-to-assemble pH correction system.

• FRP Vessel 10” x 54”: x 1

• Manual Controller Head (T2): x 1

• Calcite pH Fix Media 25kgs: x 2 Bags

• Riser Pipe: x 1

• Top and Bottom Strainers: x 1 Set

Dimensions : 

• Vessel Diameter: 10 inches (Approx. 25.4 cm)

• Vessel Height: 54 inches (Approx. 137.2 cm)

• Total Height (with Head): Approx. 145 cm

• Empty Weight: $\text{Approx. }7-8\text{ kg}$ (Lightweight for installation)